JeePerf CONTROL ARM Bushings Re-engineered for Control, Comfort, Long Life And Responsive handling

If your Tesla is suffering from early tire wear, handling problems, or loud noises under the chassis, you could be dealing with worn out control arm bushings.  Designed to attach the  wheel assembly to the vehicle, your control arms are a crucial part of your suspension system.

One of the bushings' function is to absorb impacts from the road, smoothing and quieting out your ride.  


The material used to absorb impact and vibrations in OEM bushings is rubber which had served the automotive industry for well over 80 years. With age, however, rubber loses its natural oils due to the elements, causing it to harden up, dry rot, crack and sag under the weight of the vehicle. It will lose its ability to absorb impacts and vibrations, and it will sag throwing off your suspension geometry and wheel alignment. When this happens, you start hearing more of the road noises, feeling more of its impact, losing your ability to steer the vehicle as was intended and wear out your tires prematurely.  

The bushings on the rear Camber links of your Tesla, if worn, will allow for uncontrolled rear camber changes based on axle torque. When they wear enough, you'll start getting clunks, bangs and "drive weirdness." (Pulling one direction or another under throttle or regen) With grossly excessive wear you risk bending or shearing the bolts which go through them under shock loads which can collapse the suspension.

LONG-TERM PERFORMANCE   

At JeePerf, we build each bushing to exceed OE specifications by a great margin. Using modern materials and novel design techniques, we build our bushings for longevity, comfort, low to no maintenance requirements, precise handling and perfect fit. While the OE bushings might sag or rot away with time, our control arm bushings will have a very long service life.  

Why use JeePerf bushings?  

We build our bushings to achieve special design targets. They need to have a precise fit, very long, reliable service life, steady, non-degradable performance throughout their service life, and to have better value than OEM offerings. For control arms, they also need to provide an unimpeded, smooth, non-binding, fluid motion that is comfortable to live with on a daily basis. 

In order to achieve these goals we decided to use industrial strength Spherical bearings to build the exterior, axle side spherical bushings. 

With this design we are able to achieve more flexing and more load handling capacity than OEM, while maintaining low NVH, and deliver a very long service life at the same time. 

This design will outperform OEM design and more than pay for itself in rear tire life extension and less frequency to replace.

We strongly believe that using our bushings are a great upgrade to your suspension and will deliver the best road handling and daily driver comfort possible. 


We believe our bushings are the ultimate upgrade to an otherwise average, OEM bushings and we invite you to consider them as a long life, high performance, yet economical upgrade to other OEM like alternatives. 

We spared no expense designing and building these bushings which are hand built using the very best materials available. 

Built by enthusiasts, for enthusiasts, we invite you to consider them when you want to Replace, IMPROVE, UPGRADE and SAVE future repair costs for your suspension links.

Re-engineered upgrade. This listing is for 2 bushings to upgrade BOTH rear Camber arm links axle side.

Tesla Part Number 1043963-00-C